Filter
Top Products
161
CHAPTER2 Dependence Functions
2.4.4.1 Setting/Release of Debug Functions
The debug function is set or can be released while executing the user program.
■ Commands Available during Execution of User Program
A specific debug feature can setting/be released while executing the user program in the emulator debugger
(MB2100-01). Either the dialog or the command can setting/be released.
Table 2.4-1 shows the commands available during execution of user program. For more details, refer to
"● Debugger" in "SOFTUNE Workbench Command Reference Manual".
Table 2.4-1 Commands Available during Execution of User Program (1 / 2)
Function Major Command name
*1
Reset MCU 1.3 RESET
Memory operation (read/write) 5.1 EXAMINE
5.2 ENTER
5.3 SET MEMORY
5.4 SHOW MEMORY
5.5 SEARCH MEMORY
5.8 COMPARE
5.9 FILL
5.10 MOVE
5.11 DUMP
Line assemble/disassemble 6.1 ASSEMBLE
6.2 DISASSEMBLE
Set/delete breakpoint 3.1 SET BREAK (type1)
3.3 SET BREAK (type3)
3.6 CANCEL BREAK
3.7 ENABLE BREAK
3.8 DISABLE BREAK
3.10 SET DATABREAK (type2)
3.12 CANCEL DATABREAK
3.13 ENABLE DATABREAK
3.14 DISABLE DATABREAK
Set/delete sequencer 3.15 SET EVENT
3.17 CANCEL EVENT
3.31 SET SEQUENCE (type2)
3.33 CANCEL SEQUENCE
3.34 ENABLE SEQUENCE
3.35 DISABLE SEQUENCE
Set/delete trace trigger 4.28 SET TRACETRIGGER
4.30 CANCEL TRACETRIGGER
4.31 ENABLE TRACETRIGGER
4.32 DISABLE TRACETRIGGER