Filter
Top Products
198
CHAPTER2 Dependence Functions
2.4.8.2 Saving Trace Data
This section explains how to save trace data.
■ Saving Trace Data
Trace data can be saved in a specified file.
The following two methods are available to save trace data: using GUI (window or dialog) and using only
the command. The same result is obtained from both methods.
Using Command for Saving Trace Data
1. Display the trace window.
- Select [View] - [Trace] menu.
2. Specify the name of the file in which to save trace data.
- Right-click on the trace window, and select [Save] from the pop-up menu. The [Save as] dialog
appears.
Specify the file name and where to save trace data. For details, refer to Section "4.4.8 Trace" in
"SOFTUNE Workbench Operation Manual".
Using Command for Saving Trace Data
1. Save trace data.
- Execute the SHOW TRACE/FILE command.
For details, refer to Section "4.16 SHOW TRACE (type 1)" in "SOFTUNE Workbench Command
Reference Manual".
When additionally saving trace data in an existing file, execute the TRACE/FILE/APPEND
command.