Filter
Top Products
CHAPTER 4: Installing Components
36
3 Pull the plastic tabs (1) away from the sides of the memory module slot. If you are replacing
a memory module, lift the old module (2) out of the slot.
4 Align the notch on the new module with the notch in the memory module slot, then press
the module firmly into the slot. The tabs on the sides of the memory slot should secure the
memory module automatically.
5 Follow the instructions in “Closing the server case” on page 26.
6 Turn on the server and open the BIOS setup utility. Verify the System Memory listed in
the Main menu. When you exit the BIOS setup utility make sure that the operating system
completely loads. If you receive an error, see “Memory” on page 74.