Filter
Top Products
www.gateway.com
63
Miscellaneous messages
Keyboard Error
Keyboard is not present or the hardware is not responding when the keyboard controller is
initialized.
Keyboard/Interface Error
Keyboard Controller failure. This may indicate a problem with system hardware.
System Halted
The system has been halted. A reset or power cycle is required to reboot the machine. This message
appears after a fatal error has been detected.
Understanding sensors and sensor readings
Sensor type codes
The following section lists the sensors supported by the BMC, including type, name, status, and
current reading. The status and current reading information is for example only.
Sensor type Sensor name Sensor status Current reading
Sys. ACPI Pwr State ACPI State Normal 5
Module/Board System Reset State Deasserted 0
Fan SYS FAN 1 Normal operating
range
2362.39 RPM
Fan SYS FAN 2 Normal operating
range
1771.79 RPM
Voltage System 12V Normal operating
range
12.04 Volts
Voltage System 5V Normal operating
range
5.0652 Volts
Voltage System 5V STBY Normal operating
range
4.9848 Volts
Voltage System 3.3V Normal operating
range
3.4026 Volts
Voltage VTT CPU Normal operating
range
1.1931 Volts
Voltage VCORE 0 Normal operating
range
1.2901 Volts
Voltage VCORE 1 Normal operating
range
1.2901 Volts
Voltage VTT MEM Normal operating
range
0.8924 Volts
Voltage 1.5V NB Normal operating
range
1.4841 Volts
Voltage 1.9V PHY Normal operating
range
1.9206 Volts