Filter
Top Products
Model G0746/G0749 (Mfg. Since 3/13)
-47-
The follow rest mounts to the saddle with two hex
bolts (see Figure 61). It is used on long, slender
parts to prevent workpiece deflection from the
pressure of the cutting tool during operation.
Adjust the follow rest fingers in the same manner
as the those on the steady rest.
Note: To reduce the effects of friction, lubricate
the finger tips with generous anti-sieze lubricant
during operation.
The carriage, cross slide, and compound rest
have locks that can be tightened to provide addi-
tional rigidity during operation, especially during
heavy cuts.
See Figures 62–63 to identify the locations of the
locks for each device.
Tools Needed Qty
Open-End Wrench 13mm .................................. 1
Follow Rest Carriage & Slide
Locks
Tools Needed Qty
Open-End Wrench 24mm .................................. 1
Figure 61. Follow rest attachment.
Hex
Bolts
Fingers
Figure 63. Location of compound rest lock.
Compound Rest
Lock
Figure 62. Location of carriage and cross slide
locks.
Carriage
Lock
Cross Slide
Lock