Filter
Top Products
Model G0746/G0749 (Mfg. Since 3/13)
-65-
G4985—Machine Shop Practice-Vol. 1 - Book
G4986—Machine Shop Practice-Vol. 2 - Book
Karl Hans Moltrecht's two-volume work on metal-
working operations delivers the ultimate teaching
and reference tool for basic cutting operations,
layout work, lathe turning, drilling operations, taper
and angle turning, and boring work. Written to aid
the beginner as well as the experienced machinist
or engineer. Due to their nature, books are non-
returnable. Defective books will be replaced.
Figure 107. G4985 Machine Shop Practice
Book.
Figure 108. H7991 Mini Mag Base Indicator Set
H7991—Mini Mag Base Indicator Set
Set features a 7 Jewel indicator with 0.0005" reso-
lution. The mini magnetic base measures 1
3
⁄16" x
1
3
⁄16" x 1
3
⁄8" and includes a single lock knob for
easy set-ups. Includes 2 dovetail tool posts and a
protective plastic case.
Figure 110. H6095 Digital Readout.
H6095—Digital Readout (DRO)
This is one of the finest two-axis DRO's on
the market today. Features selectable resolution
down to 5µm, absolute/incremental coordinate
display, arc function, radius/diameter function,
master reference datum, 199 machinist defined
tools, double sealed scales, inches/millimeters
and linear error compensation. Don't be fooled
by our low prices—this is only a reflection of the
absence of any “middlemen” in the marketing
structure—not a reflection of the quality.
T10118—Tailstock Digital Readout
Here’s the slickest setup for managing the exact
depth of cut with your tailstock! Both the scale
display and remote display come with a 0.0005"
(five ten-thousandths of an inch) resolution, inch
or millimeter display, zero keys and ON/OFF keys.
The scale has an 8" range and its display features
ABS or INC mode as well as a Hold key. Both dis-
plays read independently of each other, too!
Figure 109. T10118 Tailstock Digital Readout.
You Have to
Make this Part