Filter
Top Products
TWO WAYS TO ANCHOR YOUR DISHWASHER
F $oc_r anchori_g
with _' lag screw_
_ Toe plate assembtv
FIGURE11
You MUST anchor your dishwasher to keep it from tilting when the door is opened or closed.
Countertop Anchoring:
1. If the countertop mounting bracket flange is }onger than you need, mark it, remove it, and saw off the unneeded part.
2, Adjust leveling screws, if necessary, so that the mounting brackets touch the underside of countertop
3 Screw the mounting bracketfirmlyto thecounter[op,
4 Open and dose the dishwasherdoor°There shouldbe no interferenceor scratchingas itmoves,
Floor Anchoring: Difficult procedure. Use only where the countertop bracket cannot be used.
1 Use 1/4" lag screws through the holes provided as illustrated
2. Use expansion fasteners if the floor is concrete After the anchoring is completed, replace the toe plate assembly
You will notice that the vertical height of the toe plate is adjustable to fit neatly against your floor or floor covering
INCREASE
\
DECREASE
_"_-.,-_OEPLATEADJUS]MENTSCREWS
FIGURE12
15