Filter
Top Products
t:_._ SCREW
WASHER
UPPER IMPELLER
6
2 SEAL
MACERATOR BLADE 5
SPACER PLATE
SHROUD 4
._._------_ PU M P PLATE
' PUMP GASKET
O RING
'(_ LOWER IMPELLER
SHIMS
3
SCREW-_
PUMP HOUSING
LOWER
RING CLAM
FAN SLING
FIGURE30A
MP GASKET
SCR
B,
Pump Assembly
The pump assemblyconsists of the following components (Refer to Figure 3OA ]
1. Pump housingor castingwhich consistsof an upper and lower parL |t attaches directly to the main motor and
the tub,
The upper housing directs water from the upper impeller into the spray arm
2, ,..CharSeal- Provides a water tight seal which prevents water from leaking from he pump housing at the motor
shaft, The sealconsists of two parts, The rubber mounted carbon seal is seated into the pump housing and the
rubber mounted ceramic seal fits into the lower impeller.
29