Filter
Top Products
4, Install plastic retainer into valve with center protrusion facing you, Push untii it snaps into the groove
cut into the body of the valve
6
Press screen into valve, being careful not to crush or change the shape of the screen,, This is important
to keep dirt particles out of the valve tha't will cause it to malfunction,
The solenoid and bracket on this valve may have to be rotated in relation to the vatve body to match
the original valve as illustrated, You need only to take three of the four screws out to rotate the
solenoid and bracket
7., Install the sealing washer on undercounter valves,
8, Mount the valve to the bracket or frame of the dishwasher_
9. Recheck selection of flow washer by operating dishwasher through the fill phase° Make sure fill time is
correct for the flow washer you have selected,
25