Kenmore 808353 Sander User Manual


 
Water Inlet Valve Kit
Undercounler 808668
Portable 808667
KI'[S INCLUDE: t water vane
! metal washer
4 flow washers
t plastic retainer
1 screen
2 terminal insulators
t sealer washer (undercounter only)
This ki_ is used for several applications Use the flew washer in this kit which wi_!provide the correct flow rate for your
dishwasher
Install parts in the order illustrated
UNDERCOUNTER
PORTABLE
METAL WASHER"
FLOW
WASHER--'_
PLASTIC _ ]
F:RETAIN E __
(__ SCREEN
SEALER WASHER
CURVED SIDE
METAL
FLOW WASHE
PLASTIC
RETAINER
SCREEN
1 Remove plug from valve, discard Remove any foreign particles from valve
2. install flat metal washer,
3, Choose correct flow washer from the chart. =Fhereare identification markings Qn the fiat side of
the flow washer° Install the flow washer with identification markings facing you Curved side
should be against the ftat metal washer.
IDENTIFICATION
MARKING_
NOTE:
METAL
WASHER
4E
2,0,2,5
_af/min
5E
175_-lo%
6F
1,6 Z 10%
DISHWASHER
WIDTH
24'; IB" '"
X
X
X
X
FILL TIME
-60sec,(gO see
---'-----1 45 sec_
F---
X
b<
X
ORIGINAL VALVE
Whiiei_'oeo
E ....
"Yellow Lt, Blue Red
IX
X
b<
Biue
X
Do not rely on original valve color only Compare dishwasher fill time and dishwasher width to
make sure the correct flow washer is used.
*Some models with 90 sec. fill time use an abbreviated water fill (45 sec) on certain cycles.
If the valve on the dishwasher is pink, it is a replacement valve, Use the same flow washer as in the valve
Refer to dishwasher width vs, fill time to make sure it is the correct flow washer
24