Filter
Top Products
2 SUMP
(SOME MODELS)
3
SCREW
DIFFUSER
SCREW
wAs.ER
4 UPPER tMPELLER_
4 MACERATOR ¢_
SPACER PLATE __
4
SHROUD
5
PUMP PLATE
GASKET--
b RING
LOWER IMPELLER
1
I
6 GASKET
6 MOTOR
FIGURE36
H Motor Replacement (If you have a dishwasher manufactured in 1978 or later, refer to the procedure on Page 40)
To replace the main motor, it is necessary to remove the motor and circulating pump assembly from the dishwasher.
Follow the procedure as outlined and refer to Figure 36-
IMPORTANT:
Do not attempt any repairs on the machine without first disconnecting the dishwasher from
electrical power,
1 Disconnect wires, circulating hose and drain hoses from the pump casting,
2 Remove spray arm nut, washer, spray arm, and sump cover if used, (2)
37