Filter
Top Products
INSTALLATION
A2.2 A2.2
VANTAGE® 500
TECHNICAL SPECIFICATIONS - VANTAGE 500 DEUTZ (K2405-1)
INPUT - DIESEL ENGINE
Make /Model Description Speed (RPM) Displacement Starting Capacities
System
DEUTZ 4 cylinder High Idle 1890 190 cu. in 12VDC battery Fuel
F4L2011 48HP (36 kw) Low Idle 1425 (3.1L) & Starter 25 US gal.
Diesel Engine @ 1800 RPM Full Load 1800 (94.6L)
Bore x Stroke Oil:
2.5 US gal.
3.70” x 4.41” (9.5L)
(94mm x 112mm)
RATED OUTPUT @ 104°F(40°C) - WELDER
Duty Cycle Welding Output Volts at Rated Amps
100% 500 Amps (DC multi-purpose) 40 Volts
60% 550 Amps (DC multi-purpose) 36 volts
50% 575 Amps (DC multi-purpose) 35 volts
PHYSICAL DIMENSIONS
Height
(2)
Width Depth Weight
42.0 in 31.5 in. 63.1 in. 1532lbs.
(1066.8 mm) (800.1mm) (1603mm) (695kg)
(Approx)
1. Output rating in watts is equivalent to volt-amperes at unity power factor.
Output voltage is within +/- 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.
2. Top of Enclosure. Add 8.9” (226mm) for exhaust.
OUTPUT @ 104°F(40°C) - WELDER AND GENERATOR
Welding Range
30 - 575 Amps CC/CV
20 - 250 Amps TIG
Open Circuit Voltage
60 Max OCV @ 1900 RPM
Auxiliary Power
(1)
120/240 VAC
12,000 WATTS, 60 Hz., Single Phase
20,000 WATTS, 60 Hz., Three Phase
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC