Filter
Top Products
F-55
TROUBLESHOOTING & REPAIR
F-55
7. Carefully remove the input rectifier
bridge.
8. When installing a new input rectifier
apply a thin coating of Dow Corning
340 Heat Sink Compound (Lincoln
E1868) to the mating surfaces.
Torque the mounting cap screws
and nuts to 44 IN-LBS.
9. Reconnect the eight leads to the cor-
rect terminals and torque the phillips
head screws to 31 IN-LBS.
INPUT RECTIFIER BRIDGE REMOVAL AND REPLACEMENT (continued)
INVERTEC V250-S
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC