Filter
Top Products
30 Operating the Meter
1DATALOG 5UNITS
2 TIME AVG 6 RS232
3 SPAT I AL 7 PROBE
4 BAT / L I FE 8 NEXT
F1 F2 F3 F4
Key Menu Options Chapter
1
DATA LOG
Log with time and date stamp.
Log spatially averaged values with time
and date stamp.
Continuous logging at various rates.
8
2
TIME AVG
Turn fixed time averaging (various
duration) on or off.
9
3 SPATIAL
Turn the spatial averaging mode (used for
whole body averaging) on or off.
7
4 BAT/LITE
Check battery charge status and
estimated time remaining.
Turn the back light on or off.
12
5
UNITS
Select from all appropriate units of
measure (i.e., mW/cm
2
, V/m, V
2
/m
2
) for the
probe in use. Percent of Standard is the
only unit of measure for shaped frequency
response probes.
6
6
RS232
Change the baud rate.
Turn the RS232 port on or off. (Automatic
on for Model 8718B. Menu is for Model
8718 only)
17
7
PROBE
Show the model and serial number of the
probe in use.
Select another probe and restart the
zeroing process
4
8 NEXT
Go to the Second Menu Screen.
First Menu Screen