Filter
Top Products
60 Operating the Meter
11. To make another time-averaged measurement over the
same interval, press F1 (START) again.
12. To temporarily suspend the time average mode (once
the current measurement interval has been completed
or stopped) and make real time measurements, press
F2 (CLR). To make another time-averaged
measurement over the same interval, press F1
(START) again.
13. To end time averaging altogether and return to the
standard measurement screen (once the current
measurement interval has been completed or
stopped), press F4 (QUIT). To initiate time averaging
again at a later point, use the menu system to select
TIME AVG from the First Menu Screen.
To temporarily pause during a time-averaged
measurement...
1. To temporarily suspend time averaging, press F3
(PAUSE). The word *PAUSED* will appear on the
fourth line of the display. To resume time averaging
and complete the measurement, press F1 (START).
24. % S DT
ERAGE
39.5 MAX 10
.4
SEC
TSART
CLR
MENU QU I T
2
F1 F2 F3 F4
AV
If you access the
menu system from
the Opening Menu
Screen, you will re
-
turn to that screen.
Once a probe has
been selected and
zeroed, the mea
-
surement screen will
reflect the averaging
mode that you have
selected.
Note
24 . 2 % STD AVERAGE
39.5 MAX CF 1.00
START *PAUSED * STOP
F1 F2 F3 F4