Filter
Top Products
50 Operating the Meter
DATA POINT NO. 001
12. 1 % STD AVG
27. 5 % STD MAX
SAVE D I SCARD
F1 F2 F3 F4
10. Press F1 (SAVE) to permanently log this data point into
the meter’s memory with its associated data point
number. The meter will automatically return to the
logged measurement screen.
11. Press F3 (DISCARD) to erase the data point from the
meter’s temporary memory. The meter will
automatically return to the logged measurement
screen and display real time values.
12. Press F1 (START) again to begin the second spatially
averaged data point. It will automatically be assigned
data point 002 providing that you had saved the first
data point. If you had elected to discard the first data
point, then this point will be designated data point 001.
13. Press either F1 (SAVE) or F3 (DISCARD).
14. Continue to record up to 999 spatially-averaged data
points in this manner. Both the average and maximum
values will be saved and will be associated with a
specific data point number.
9. A screen will appear that indicates the average and
maximum values of the reading that has been
temporarily stored in memory and the number of the
data point. The first data point will be 001.
12. % S DT
27. 5 MAX CF
1.
0
STOP
1
F1 F2 F3 F4
0