Filter
Top Products
73Chapter 11 Using the RF Exposure Standards Feature
9. Press F1 (OK) to begin using this standard as a
reference.
10. Alternately, press F4 (STNDS) to select another
standard.
For standards with two or three tiers...
11. A new screen will appear that lists the complete
standard number at the top of the display. The
available tiers will be listed below the basic standard.
12. Press the number on the keypad that matches the
desired tier. The screen will change so that only the
standard and the selected tier are shown with two
options available for the function keys.
13. Press F1 (OK) to begin using this standard and tier as a
reference.
14. Alternately, press F4 (STNDS) to select another
standard.
FCC REGULAT IONS ' 97
1 OCCUPA ' L /CONTRL 'D
2 GEN POP /UNCONTR ' D
ENTER NO . TO SELECT
F1 F2 F3 F4
FCC REGULAT IONS ' 97
OCCUPA ' L / CONTRL ' D
OK STNDS
F1 F2 F3 F4
Changing the level
referenced on a
multi-tier standard
does NOT change the
characteristics of a
probe ie. a probe
rated at 600% of oc-
cupational limits al-
ways yields an output
in Percent of the Oc-
cupational limits.
Note