Filter
Top Products
91Chapter 15 Advanced Settings
7. Once the correct probe temperature is displayed on
the screen, press F4 (SAVE). The meter will
automatically return to the measurements screen.
8. Alternately, press F1 (AUTO) to return to the default
auto correct mode.
Clearing the Memory
If you determine that there is insufficient memory available to
perform the desired logging task because much of the meter’s
memory has been used, it will be necessary to empty the
memory. All data will be lost when the memory is cleared.
To download the current memory contents prior to clearing the
memory you must connect the 8718B to your computer. See
Chapter 18, User's Software.
To clear the memory...
1. Access the settings menu by following the procedure
described in
Accessing the Settings Menu.
2. Press 3 (CLEAR MEMORY). A screen will appear
requesting that you confirm your request and warning that
the stored information will be lost.
3. Press F1 (CLEAR) to clear the memory or F4 (ABORT)
to return to the First Menu Screen without clearing the
memory. Press Esc to return to the measurements
screen.
CLEAR MEMORY
CLEAR I NG THE MEMORY
CAN NOT BE REVERSED
CLEAR ABORT
F1 F2 F3 F4
Note
All data will be lost
when the memory is
cleared.