Filter
Top Products
53Chapter 8 Data Logging
6. To log for a specific interval of time, enter a two-digit
number on the keypad. If you make a mistake entering
a number, simply continue entering numbers until the
correct value is displayed. Then press either F1 (SEC),
F2 (MIN), or F3 (HRS) and the meter will automatically
return to the measurement screen with new options
available for the function keys.
7. To log for an indeterminate interval of time (until you
tell the meter to stop or the memory is filled), press
F4 (CONT). The meter will automatically return to the
measurement screen with new options available for the
function keys.
8. Proceed to make measurements as normal. To initiate
logging, press F1 (LOG). The meter will beep every
time a data point is recorded.
9. If a specific interval of time had been selected, the
meter will automatically stop logging at the end of this
interval. To stop logging earlier or when set to an
indeterminate period of time, press F3 (END).
12. 1 % STD
27.5 MAX CF 1.00
LOG MAXR MENU QUI T
F1 F2 F3 F4
12.1 % STD
27.5 MAX CF 1.00
LOG END QU I T
F1 F2 F3 F4