Filter
Top Products
63Chapter 9 Time-Averaged Measurements
To initiate Mode 2 averaging (averaging to meet the
requirements of a specific standard)...
1. Make sure that the meter is set for the correct standard
or change it if needed. See Chapter 11, Using the
Standards Feature.
2. Make sure the meter is set to the correct frequency for
the measurement you are making. See page 64.
3. Press number 2 on the keypad to select STANDARDS
AVG from the averaging menu screen. Selecting
Mode 2 averaging will automatically shut off Mode 1
averaging if it is on.
4. A new screen will appear stating that averaging has
been enabled in accordance with a specific standard.
5. Press F3 (CANCEL) to return to the initial time
averaging menu screen to make another selection or
press F4 (OFF) to turn time averaging off and return to
the standard measurement screen.
6. Press F1 (BEGIN) to automatically return to the
measurement screen with new options available for the
function keys.
AVERAG I NG ENABLED
STND: IEEEC95.1-1999
LEVEL : CONTROLLED
BEG I N CANCEL OFF
F1 F2 F3 F4
6.26 Wmcm/
2
11.5 MAX 10.00 GHz
START MENU FREQ QU I T
F1 F2 F3 F4