Filter
Top Products
34 Operating the Meter
Default Conditions Upon Turn-On
The Model 8718B is designed to automatically return to a basic
set of operating parameters every time it is turned on. Although
in some cases this may require additional key strokes to set up
the meter as desired, this feature is designed to minimize the
chance of making measurements while unknowingly having the
meter incorrectly configured.
The table below lists the operating parameters that can be
expected upon turn-on.
Parameter Default Condition
Alarms Last Used settings will be used
Back Light OFF to conserve battery power.
Blank Out OFF – display will be active.
Cable/Fiber Optic Last Used input will be active.
Data Logging OFF
Display Contrast Last Used setting will be in use.
Display Screen Main Measurement Display Screen
Lockout OFF – keypad will be active.
Probe Model Last Used probe model will be featured
on the probe selection screen.
Right/Left Last Used setting for function key
location will be in use.
RS232 Port OFF to conserve battery power.
Spatial Averaging OFF
Standard Last Used standard will be referenced.
Temperature OFF – the meter will sense ambient
Correction temperature and automatically correct.