Filter
Top Products
11.
Warning Labels
Router Safety
•
For your own safety, read and understand table, router and accessory warnings and instructions before use.
•
Unplug power cord before assembly, adjustments or changing bit.
• Securely fasten router to table.
• Clamp or bolt complete unit to solid, level surface at a comfortable work height.
• Wear eye and respiratory protection.
• Keep guard in place and functioning.
• Feed workpiece against bit rotation.
• Guide workpiece by fence. Do not "freehand".
• Do not feed workpiece between fence and bit diameter.
• Keep hands away from spinning bit and avoid awkward hand positions.
• Do not stand on table or use as step stool.
WARNING
!
Sander Safety
• For your own safety, read and understand the manual for the use of this accessory with the workstation.
• Turn OFF and unplug the table saw before setting up the belt sander accessory in workstation. Sander must be
OFF and unplugged from power source before assembling to insert plate.
• Securely fasten sander to insert plate then entire assembly to workstation.
• Route cord away from work area.
• Know how to shut off the sander!
• Do not run table saw at the same time as the sander. Turn off sander before returning to table saw operation.
• Wear eye and respiratory protection.
• Do not wear gloves, jewelry, or loose clothing.
• Keep fingers and clothing away from belt and pulleys.
• Support workpiece with miter gage or backstop and worktable.
• Maintain 1/16-inch maximum clearance between table and sanding belt.
• If dust bag is used, empty it frequently to avoid spontaneous combustion of dust particles.
WARNING
!
Jigsaw Safety
• For your own safety, read and understand tool manual and accessory instructions before each use.
• Disconnect plug from power source before making any assembly, adjustments or changing accessories.
• Wear eye protection.
• Securely fasten jigsaw to insert and fully assembled unit to table.
• Guide workpiece by fence. Do not "freehand" cut.
• Keep fingers away from reciprocating blade and avoid awkward hand positions.
• Use push sticks and fixtures as necessary.
• Do not stare into the laser light source. Laser light can damage your eyes.
WARNING
!
WARNING ! THE WARNINGS SHOWN BELOW CAN BE FOUND ON YOUR TOOL. THESE WARNINGS ARE ONLY
A CONDENSED FORM OF THE MORE DETAILED SAFETY RULES AND PRECAUTIONS THAT APPEAR IN YOUR
OWNER'S MANUAL. THEY SERVE AS A REMINDER OF ALL SAFETY RULES NEEDED FOR SAFE OPERATION
OF THIS TABLE SAW.