A SERVICE OF

logo

P-202H Plus v2 Support Notes
6. Select Use Serial Cable to Assign IP Address and Serial Port of your
computer then click Next and OK.
7. Turn the Firebox off and on again. Wait for the configuration file to be
uploaded.
8. In the 'WatchGuard Control Center' click on the Policy Manager icon.
9. Pull down Network -> Branch Office VPN -> IPSec. See the figure below.
10. Click Gateway, and click Add.
11. Enter a name for remote security gateway in Name field, enter the remote
gateway IP in Remote Gateway IP field.
All contents copyright © 2006 ZyXEL Communications Corporation.
189