A SERVICE OF

logo

P-202H Plus v2 Support Notes
3. LAN to LAN
IP Connection
Introduction
This configuration note explains how to set up two P-202H Plus v2 routers for a
LAN-to-LAN connection. Once the connection is established, the workstations on
both LANs will be able to perform any TCP/IP applications (e.g., FTP, Telnet,
etc.). There will be three items that you need to set up. These are workstation
and the two P-202H Plus v2 routers.
Configuration
Setting up the workstation on both LANs
All contents copyright © 2006 ZyXEL Communications Corporation.
47
To set up the workstations, you will need to set the following parameters: