Filter
Top Products
P-202H Plus v2 Support Notes
5. Select IPSec Keying Mode to IKE and Negotiation Mode to Main.
6. Source IP Address Start and Source IP Address End are PC 1 IP in
this example. (the secure host behind P-202H Plus v2)
7. Destination IP Address Start and Destination IP Address End are PC
2 IP in this example. (the secure remote host)
8. My IP Addr is the WAN IP of P-202H Plus v2.
9. Secure Gateway IP Addr is the remote secure gateway IP, that is
WatchGuard WAN IP in this example.
10. Select Encapsulation Mode to Tunnel.
11. Check the ESP check box. (AH can not be used in SUA/NAT case)
12. Select Encryption Algorithm to DES and Authentication Algorithm to
MD5, as we configured in WatchGuard.
13. Enter the key string 12345678 in the Preshared Key text box, and click
Apply.
All contents copyright © 2006 ZyXEL Communications Corporation.
187