Filter
Top Products
P-202H Plus v2 Support Notes
-3045
Message: PINI ERROR netMakeChannDial: err=-3045, rn_p=576de0
Meaning: redial stopped.
Solution: do nothing, it should be information.
-3046
Message: PINI ERROR netMakeChannDial: err=-3046, rn_p=76de0
Meaning: no number available to make a call again.
Solution: do nothing, it should be information.
-3047
Message: PINI ERROR netMakeChannDial: err=-3047, rn_p=56de0
Meaning: first call to peer with CLID authenticated and the peer is
obtained CLID but PPP is not up yet, second call to the peer
with same CLID is coming.
Solution: using different CLID.
-3048
Message: PINI ERROR netMakeChannDial: err=-3048, rn_p=576de0
Meaning: remote node is not L2TP enabled or supported.
Solution: change remote side configuration - enable L2TP if possible.
Other Error Codes
35. Message: PINI ERROR LoopBack Test Fail: -4
Meaning: isdn loopback test fail due to no link or wrong number.
Solution: check the Menu 2 setting and reintialize ISDN line.
36. Message: PP09 ERROR Inet SUA: cannot get IP addr from server.
Meaning: Server did not assign IP address to you when you are using SUA.
Solution: request server assign IP address to you if you need use SUA.
37. Message: PNET ERROR iproute SUA O/G: No port for source A0659522,264
Meaning: outgoing call failed since the port for the source is not in the SUA table.
Solution: too many users on the LAN.
38. Message: PP09 WARN Discard unknown network protocol 0x802B.
All contents copyright © 2006 ZyXEL Communications Corporation.
432