Filter
Top Products
P-202H Plus v2 Support Notes
The IP addresses we use in this example are as shown below.
LAN 1 FreeS/WAN Linux box
P-202H Plus
v2
LAN 2
192.168.10.
0/24
LAN: 192.168.10.20
WAN: 65.170.185.111 Gateway: 65.
170.185.65
LAN:
192.168.0.254
WAN: 202.132.
170.1 Gateway:
202.132.170.25
4
192.168.0.
0/24
1. Setup FreeS/WAN
We presume that your Linux's kernel has been compiled to support FreeS/WAN,
and FreeS/WAN has been also installed successfully in your system. You can
refer to the following URL for more information,
http://www.FreeS/WAN.org/.
Two files must be configured in /etc directory.
ipsec.conf:
All contents copyright © 2006 ZyXEL Communications Corporation.
264
config setup
interfaces="ipsec0=eth1"
klipsdebug=none
plutodebug=none
plutoload=%search
plutostart=%search
conn %default
keyingtries=3
conn P-202H Plus v2
left=65.170.185.111