Filter
Top Products
P-202H Plus v2 Support Notes
B Channel Usage:
o Set to Leased/Unused if you are using one 64K-leased line
o Set to Leased/Leased if you are using one 128K-leased lines
o Set to Leased/Switch if you are using one 64K-leased line and one
switch line
The P-202H Plus v2 does not allow two leased lines to connect two different
remote nodes. Therefore,
if the Leased/Leased is configured in Menu 2, it allows a 128K-leased connection
to a remote node or allows MP bundling to a remote node.
Menu 11.1 - Remote Node Profile
Rem Node Name= LAN1 Edit PPP Options= No
Active= Yes Rem IP Addr= 140.113.1.1
Call Direction= ******** Edit IP= No
Incoming: Telco Option:
Rem Login= Transfer Type= Leased
Rem Password= Allocated Budget(min)=
Rem CLID= N/A Period(hr)=
Call Back= N/A Schedules=
Outgoing: Carrier Access Code=
My Login= test Nailed-Up Connection= No
My Password= ******** Toll Period(sec)= 0
Authen= CHAP/PAP Session Options:
Pri Phone #= N/A Edit Filter Sets= No
Sec Phone #= N/A Idle Timeout(sec)= 100
Press ENTER to Confirm or ESC to Cancel:
• Set the 'Transfer Type' to 'Leased' for the ISDN leased-line connection
8. Supplemental Service
The P-202H Plus v2 supports the following supplementary phone features on
both of its POTS ports.
1. Call Waiting
All contents copyright © 2006 ZyXEL Communications Corporation.
95
2. Three Way Calling