Filter
Top Products
P-202H Plus v2 Support Notes
The PPTP is supported in Windows NT and Windows 98 already. For Windows
95, it needs to be upgraded by the Dial-Up Networking 1.2 upgrade.
• Configuration
This application note explains how to establish a PPTP connection with a remote
private network in the P-202H Plus v2 SUA case. In ZyNOS, all PPTP packets
can be forwarded to the internal PPTP Server (WinNT server) behind SUA. The
port number of the PPTP has to be entered in the SMT Menu 15 for P-202H Plus
v2 to forward to the appropriate private IP address of Windows NT server.
• Example
The following example shows how to dial to an ISP via the P-202H Plus v2 and
then establish a tunnel to a private network. There will be three items that you
need to set up for PPTP application, these are PPTP server (WinNT), PPTP
client (Win9x) and the P-202H Plus v2.
o PPTP server setup (WinNT)
Add the VPN service from Control Panel>Network
Add an user account for PPTP logged on user
Enable RAS port
Select the network protocols from RAS such as IPX, TCP/IP
NetBEUI
Set the Internet gateway to P-202H Plus v2
o PPTP client setup (Win9x)
Add one VPN connection from Dial-Up Networking by
entering the correct username & password and the IP
address of the P-202H Plus v2's Internet IP address for
logging to NT RAS server.
All contents copyright © 2006 ZyXEL Communications Corporation.
40