Filter
Top Products
P-202H Plus v2 Support Notes
protocol filters= 2
device filters=
Output Filter Sets:
protocol filters=
device filters=
6. UNIX syslog Setup
• P-202H Plus v2 Setup
Menu 24.3.2 - System Maintenance - UNIX Syslog and Accounting
UNIX Syslog:
Active= Yes
Syslog IP Address= 192.168.1.33
Log Facility= Local 1
Types:
CDR= No
Packet triggered= No
Filter log= No
PPP log= No
POTS log= No
Firewall log= No
Configuration:
1. Active, use the space bar to turn on the syslog option.
2. Syslog IP Address, enter the IP address of the UNIX server that you wish to
send the syslog.
3. Log Facility, use the space bar to toggle between the 7 different local options.
4. Types, use the space bar to toggle the logs we are going to record.
• UNIX Setup
1. Make sure that your syslogd starts with -r argument.
-r, this option will enable the facility to receive message from the network using
an Internet domain socket with the syslog services. The default setting is not
enabled.
All contents copyright © 2006 ZyXEL Communications Corporation.
88