Filter
Top Products
P-202H Plus v2 Support Notes
perform any TCP/IP applications (e.g., FTP, Telnet, etc.). There will be two items
that you need to set up for this connection. They are the workstation and the P-
202H Plus v2 router.
• Configuration
• Setting up the Win9x Dial-Up Networking(DUN)
To set up the DUN for this connection, you will need to set the following
parameters:
o Phone number- the phone number of the P-202H Plus v2 router
o Internet account-Username and Password
o IP Address-the IP address in this case will be dynamically assigned
by the P-202H Plus v2. Generally, you should simply enter 0.0.0.0
into the IP address field.
o DNS (Domain Name Server) Address- the IP address of the DNS
server on the remote LAN.
o Default Gateway-the IP address of the P-202H Plus v2.
Please find the last three settings in Win9x>Dial-Up
Networking>Properties>Server Types>TCP/IP Settings.
• Setting up the P-202H Plus v2
Before configuring the P-202H Plus v2 for this application, you need to first
complete the following settings.
o General Setup in SMT menu 1-enter the system information.
o ISDN Setup in SMT menu 2-Configure the ISDN number
o Ethernet Setup in SMT menu 3-enter the IP address of the P-202H
Plus v2 and enable the DHCP server if it is required.
To setup the P-202H Plus v2 for this application, make sure you have the
following menus configured correctly.
All contents copyright © 2006 ZyXEL Communications Corporation.
54