Filter
Top Products
P-202H Plus v2 Support Notes
Password
Outgoing: Pri
Phone #
Enter the phone number of the remote node for calling back.
• Setup the P-202H Plus v2 for calling back to a dial-in user
Generally, there are several settings must be checked when using the CLID
callback. They are:
The 'CLID Authentication' setting in menu 13 must be configured as
'Required' or 'Preferred'.
The 'Outgoing user information' in menu 13 must be entered.
The 'Callback' setting in menu 13 must be toggled to 'Mandatory'.
The 'Callback Phone number' setting in menu 14.1 must be predefined in
menu.
The 'Remote CLID' setting in menu 14.1 must be entered for the CLID
authentication.
The following SMT only show the main settings of the CLID callback, you can
refer to the user's manual or the support note for the other settings.
1. Toggle the 'CLID Authen' option to 'Required' and enter the 'Outgoing user
information' in menu 13..
Menu 13 - Default Dial-in Setup
Telco Options: IP Address Supplied By:
CLID Authen= Required Dial-in User= Yes
IP Pool= No
PPP Options: IP Start Addr= N/A
Recv Authen= CHAP/PAP IP Count(1,2)= N/A
Compression= Yes
Mutual Authen= No
O/G Login= test Session Options:
O/G Password= **** Edit Filter Sets= No
Multiple Link Options:
Max Trans Rate(Kbps)= 128
Callback Budget Management:
Allocated Budget(min)=
All contents copyright © 2006 ZyXEL Communications Corporation.
108