Filter
Top Products
P-202H Plus v2 Support Notes
2. Click Advanced, and click VPN tab on the left.
3. On the SUMMARY menu, Select a policy to edit by clicking Edit.
4. On the CONFIGURE-IKE menu, check Active check box and give a name
to this policy.
5. Select IPSec Keying Mode to IKE and Negotiation Mode to Main, as we
configured in P-202H Plus v2 B.
6. Source IP Address Start and Source IP Address End are PC 1 IP in
this example. (the secure host behind P-202H Plus v2 A)
7. Destination IP Address Start and Destination IP Address End are PC
2 IP in this example. (the secure remote host)
8. My IP Addr is the WAN IP of P-202H Plus v2 A.
9. Secure Gateway IP Addr is the remote secure gateway IP, that is P-
202H Plus v2 B WAN IP in this example.
10. Select Encapsulation Mode to Tunnel.
11. Check the ESP check box. (AH can not be used in SUA/NAT case)
12. Select Encryption Algorithm to DES and Authentication Algorithm to
MD5, as we configured in P-202H Plus v2 B.
13. Enter the key string 12345678 in the Preshared Key text box, and click
Apply.
All contents copyright © 2006 ZyXEL Communications Corporation.
161