Filter
Top Products
P-202H Plus v2 Support Notes
Period(hr)=
Press ENTER to Confirm or ESC to Cancel:
2. Create a remote node for a LAN-to-LAN connnection using the CLID
callback.
Menu 11.1 - Remote Node Profile
Rem Node Name= LAN1 Edit PPP Options= No
Active= Yes Rem IP Addr= 192.168.2.1
Call Direction= Both Edit IP= No
Incoming: Telco Option:
Rem Login= test Transfer Type= 64K
Rem Password= **** Allocated Budget(min)=
Rem CLID= 20000 Period(hr)=
Call Back= Yes Schedules=
Outgoing: Nailed-Up Connection= N/A
My Login= test Toll Period(sec)= 0
My Password= **** Session Options:
Authen= CHAP/PAP Edit Filter Sets= No
Pri Phone #= 20000 Idle Timeout(sec)= 300
Sec Phone #=
Press ENTER to Confirm or ESC to Cancel:
CLID Settings:
Option Description
Rem CLID
Enter the remote phone number in this field which will be used
for the CLID authentication. If this number does not match the
one that the switch carries, the P-202H Plus v2 will drop the line
due to the CLID authentication failure.
Call Back Toggle to 'Yes' to turn on the callback function.
Outgoing: My
Login
Enter the user name given by the remote node.
Outgoing: My Enter the password given by the remote node.
All contents copyright © 2006 ZyXEL Communications Corporation.
107