Filter
Top Products
P-202H Plus v2 Support Notes
-3028 the node is not found
-3029 the node is inactive
-3030 dial fail
-3031 no budget
-3032 radius authentication fail
-3033 CLID is required
-3034 CLID can not be found
-3035 an outgoing call has already been placed for this remote node
-3036 call is blocked
-3037 invalid phone number
-3038 remote side is busy
-3039 no carrier
-3040 no dial tone
-3041 remote node is not active
-3042 no answer received
-3043 dial timeout
-3045 redial stopped
-3046 redial no number
-3047
-3048 remote node is not L2TP enabled or supported
-3000
Message: PINI ERROR netMakeChannDial: err=-3000, rn_p=576de0
Meaning: remote node is connecting already. (rn_p refers remote
node point, it may change for different version, and different
remote node number)
Solution: ask remote node to dial to you, then if you drop, you can dial;
or reboot.
-3001
Message: PINI ERROR netMakeChannDial: err=-3001, rn_p=576de0
Meaning: remote node call direction is configured as incoming only.
Solution: change the call direction to outgoing or both.
-3002
Message: PINI ERROR netMakeChannDial: err=-3002, rn_p=576de0
Meaning: remote node call direction is configured as outgoing only.
Solution: change the call direction to both or incoming.
-3003
Message: PINI ERROR netMakeChannDial: err=-3003, rn_p=576de0
All contents copyright © 2006 ZyXEL Communications Corporation.
428