Filter
Top Products
P-202H Plus v2 Support Notes
Advance Setup = No
B Channel Usage:
o Set to Leased/Unused if you are using one 64K-leased line
o Set to Leased/Leased if you are using one 128K-leased lines
o Set to Leased/Switch if you are using one 64K-leased line and one
switch line
The P-202H Plus v2 does not allow two leased lines to connect two different
remote nodes. Therefore, if the Leased/Leased is configured in Menu 2, it allows
a 128K-leased connection to a remote node or allows MP bundling to a remote
node.
Menu 4 - Internet Access Setup
ISP's Name= hinet
Pri Phone #= N/A
Sec Phone #= N/A
My Login= test
My Password= ********
My WAN IP Addr= 0.0.0.0
NAT= SUA Only
Address Mapping Set= N/A
Telco Option:
Transfer Type= Leased
Multilink= Off
Idle Timeout= 100
Key Settings:
o My Login and My Password are the login information provided by
ISP.
o Turn on SUA if you only have a single user Internet account.
All contents copyright © 2006 ZyXEL Communications Corporation.
93