Filter
Top Products
P-202H Plus v2 Support Notes
Use the Address Mapping Sets menus and submenus to create the mapping
table used to assign global addresses to LAN clients. Each remote node must
specify which NAT Address Mapping Set to use. The P312 has one remote node
and so allows you to configure only 1 NAT Address Mapping Set. You can see
two NAT Address Mapping sets in Menu 15.1. You can only configure Set 1. Set
255 is used for SUA. When you select Full Feature in menu 4 or 11.3, the SMT
will use Set1. When you select SUA Only, the SMT will use Set 255. For the
P100IH, there are 8 remote nodes and so allows you to configure 8 NAT Address
Mapping Sets.
The NAT Server Set is a list of LAN side servers mapped to external ports. To
use this set (one set for the P312), a server rule must be set up inside the NAT
Address Mapping set. Please see NAT Server Sets for further information on
these menus.
Enter 1 to bring up Menu 15.1-Address Mapping Sets
Menu 15.1 - Address Mapping Sets
1.
2.
3.
4.
5.
6.
7.
8.
255. SUA (Read Only)
Enter Set Number to Edit:
Let's first look at Option 255. Option 255 is equivalent to SUA in previous ZyXEL
routers. The fields in this menu cannot be changed. Entering 255 brings up this
screen.
All contents copyright © 2006 ZyXEL Communications Corporation.
122
Menu 15.1.255 - Address Mapping Rules
Set Name= SUA (Read Only)