Filter
Top Products
P-202H Plus v2 Support Notes
The P-202H Plus v2 reboots automatically after the uploading is finished.
2. Using FTP client software
Step
1
Rename the local firmware and configuration files to 'ras' and 'rom-0',
because we can not specify the remote file name in the FTP client
software.
Step
2
Use FTP client from your workstation to connect to the P-202H Plus v2 by
entering the IP address of the P-202H Plus v2.
Step
3
Enter the SMT password as the FTP login password. The default is '1234'.
Step
4
Press 'OK' key to ignore the username, because the P-202H Plus v2 does
not check the username.
Example:
1. Connect to the P-202H Plus v2 by entering the P-202H Plus v2's IP and SMT
password in the FTP software. Set the transfer type to 'Auto-Detect' or 'Binary'.
All contents copyright © 2006 ZyXEL Communications Corporation.
386