Filter
Top Products
P-202H Plus v2 Support Notes
1. LAN device and protocol input filter sets.
2. WAN protocol call and output filter sets.
3. If SUA is enabled, SUA converts the source IP address from 192.168.1.33
to 203.205.115.6 and port number from 1023 to 4034.
4. WAN device output and call filter sets.
The sequence of the logic flow for the packet from WAN to LAN is:
5. WAN device input filter sets.
6. If SUA is enabled, SUA converts the destination IP address from
203.205.115.6 to 92.168.1.33 and port number from 4034 to 1023.
7. WAN protocol input filter sets.
8. LAN device and protocol output filter sets.
Generic and TCP/IP (and IPX) filter rules are in different filter sets. The SMT will
detect and prevent the mixing of different category rules within any filter set in
Menu 21. In the following example, you will receive an error message 'Protocol
and device filter rules cannot be active together' if you try to activate a
TCP/IP (or IPX) filter rule in a filter set that has already had one or more active
Generic filter rules. You will receive the same error if you try to activate a Generic
filter rule in a filter set that has already had one or more active TCP/IP (or IPX)
filter rules.
Menu 21.1.1:
Menu 21.1.1 - Generic Filter Rule
All contents copyright © 2006 ZyXEL Communications Corporation.
58