Filter
Top Products
P-202H Plus v2 Support Notes
For more information about configure WIN2K IPSec, please refer to the following
web site.
1.
http://www.microsoft.com/windows2000/techinfo/planning/security/ipsecsteps.a
sp
2. http://support.microsoft.com/support/kb/articles/q252/7/35.asp
2. Setup P-202H Plus v2 VPN
1. Using a web browser, login P-202H Plus v2 by giving the LAN IP address
of P-202H Plus v2 in URL field. Default LAN IP is 192.168.1.1, default
password to login web configurator is 1234.
2. Click Advanced, and click VPN tab on the left.
3. On the SUMMARY menu, Select a policy to edit by clicking Edit.
4. On the CONFIGURE-IKE menu, check Active check box and give a name
to this policy.
5. Select IPSec Keying Mode to IKE and Negotiation Mode to Main, as we
configured in WIN2K.
6. Source IP Address Start and Source IP Address End are PC 2 IP in
this example. (the secure host behind P-202H Plus v2)
7. Destination IP Address Start and Destination IP Address End are PC
1 in this example. (the secure WIN2K PC) Note: You may assign a range
of Source/Destination IP addresses for multiple VPN sessions.
8. My IP Addr is the WAN IP of P-202H Plus v2.
9. Secure Gateway IP Addr is the remote WIN2K's IP, that is PC 1 in this
example.
10. Select Encapsulation Mode to Tunnel.
11. Check the ESP check box. (AH can not be used in SUA/NAT case)
12. Select Encryption Algorithm to DES and Authentication Algorithm to
MD5, as we configured in WIN2K.
13. Enter the key string 12345678 in the Preshared Key text box, and click
Apply.
All contents copyright © 2006 ZyXEL Communications Corporation.
251