Filter
Top Products
P-202H Plus v2 Support Notes
Product FAQ
1. How do I collect EPA trace? Moreover, how do I read it?
• Enable the trace in Menu 24.8 by the following CI command:
isdn fw ana on
• Make a call to remote node or ISP by:
dev dial N (N is the remote node number)
• Drop the call by:
dev channel drop bri0|bri1 (bri0 for B1 channel, bri1 for B2 channel)
• Display the trace by:
isdn fw ana off
isdn fw ana disp
2. Can I prevent the dial-in user from occupying two channels?
Yes. You can use a CI command to prevent the dial-in user from occupying two
channels.
Please enter to menu 24.8 and type the CI command:
ppp lcp mpin off (or on to allow two channels)
3. How does 'Dial Prefix to Access Outside Line' in Menu 2 (European
firmware) work?
This prefix will be placed in front of the outgoing call phone numbers when you
make an outgoing call.
4. What supplemental phone service does P-202H Plus v2 support
The P-202H Plus v2 supports the following supplementary phone features on
both of its POTS ports.
Call Waiting
Three Way Calling
All contents copyright © 2006 ZyXEL Communications Corporation.
12