Filter
Top Products
P-202H Plus v2 Support Notes
Perfect Forward Secrecy (PFS)= None
Press ENTER to Confirm or ESC to Cancel
Soft-PK VPN to P-202H Plus v2 Tunneling
This page guides us to setup a VPN connection between the VPN software and
P-202H Plus v2 router. There will be several devices we need to setup for this
case. They are VPN software and P-202H Plus v2 router.
As the figure shown below, the tunnel between PC 1 and P-202H Plus v2
ensures the packets flow between them are secure. Because the packets go
through the IPSec tunnel are encrypted. To setup this VPN tunnel, the required
settings for the software and P-202H Plus v2 are explained in the following
sections.
The IP addresses we use in this example are as shown below.
PC 1 P-202H Plus v2 PC2
202.132.155.33
LAN: 202.132.171.1
WAN: 202.132.170.1
202.132.171.33
1. Setup Soft-PK VPN
1. Open Soft-PK Security Policy Editor
2. Add a new connection named 'P-202H Plus v2' as shown below.
3. Select Connection Security to Secure
All contents copyright © 2006 ZyXEL Communications Corporation.
254