P-202H Plus v2 Support Notes
5. Click OK to save it.
Create Outgoing & Incoming VPN Policy:
1. Click Policy menu and click Outgoing tab.
2. Click New Policy to configure the outgoing VPN policy.
3. Give a name to the policy.
4. Select the Local Secure Host that we configured above as the Source
Address.
5. Select the Remote Secure Host that we configured above as the
Destination Address.
6. Select ANY as the Service.
7. For the rest settings please refer to the following screen shot. And click
OK to
save.
All contents copyright © 2006 ZyXEL Communications Corporation.
198