Filter
Top Products
P-202H Plus v2 Support Notes
Lcp negotiation failed - trace PPP packets
Ipcp negotiation failed - check if IP address is correct
- check if IP is turned on in a remote node.
- check if SUA is needed
All others - collect PPP traces
2. Remote Node/Dial-in User Connection
Related SMT screens and CI commands:
- SMT Menu 2
- SMT Menu 24.4.12
- SMT Menu 24.9
- isdn dial # (pre-ZyNOS) or dev dial # (ZyNOS)
- sys log disp
Cannot outcall to a Remote node
Use CI "isdn dial <node#>" to verify a outgoing call for a remote node. Use CI
'system event' an incoming call from a remote node.
The following are some possible failure reasons for a outgoing call:
- Dial failed ( please refer to previous chapter for more details. )
- ISDN protocol mismatched ( please refer to previous chapter for more
details. )
- Incoming only remote node, check Menu 11
• Pre-ZyNOS:
P2864> isdn dial 1
* Dial not allowed, or No Channel ( Call to a incoming only remote node, or no
free B chan )
### Hit any key to continue.###
All contents copyright © 2006 ZyXEL Communications Corporation.
394
• ZyNOS: