APC Battery Management System Battery Charger User Manual


 
®
USER’S GUIDE
Battery Management System
55
HTTP/HTTPS Port Configuration
HTTP Port Identifies the TCP/IP port used for communications by HTTP with the
Battery Management System. The default is 80.
You can change the Port setting to the number of any unused port
between 5000 and 32768 to enhance the protection provided by User
Name and Password settings.
You must then use a colon (:) in the command line to specify the non-
default port number. For example, for a port number of 5000 and a
Battery Management System IP address of 171.215.12.114, you would
use this command:
http://171.215.12.114:5000
HTTPS Port Identifies the TCP/IP port used for communications by HTTPS with the
Battery Management System. The default is 443.
You can change the Port setting to the number of any unused port
between 5000 and 32768 to enhance the protection provided by User
Name and Password settings.
You must then use a colon (:) in the command line to specify the non-
default port number. For example, for a port number of 6502 and a
Battery Management System IP address of 171.215.12.114, you would
use this command:
https://171.215.12.114:6502
Option Description