Filter
Top Products
®
USER’S GUIDE
Battery Management System
66
Configuring the RADIUS server. You must configure your RADIUS
server to work with the Battery Management System. The following
example is specific to APC’s RADIUS server.
1. Define an APC vendor in your RADIUS server; 318 is APC’s Private
Enterprise Number assigned by the Internet Assigned Numbers
Authority (IANA).
2. Define a RADIUS vendor-specific attribute called APC-Service-
Type. This is an integer with an attribute identifier of 1.
3. Configure RADIUS users. The APC-Service-Type attribute must be
configured for each RADIUS user accessing the card. This attribute is
set to one of the following values, which correspond to an access level
on the Battery Management System.
1 - Administrator
2 - Device Manager
3 - Read-Only User