Filter
Top Products
®
USER’S GUIDE
Battery Management System
83
Recipients Option
Tra p Re ce iver s
You can define up to four NMSs to be used as trap receivers when an event
occurs that has SNMP traps enabled.
In the Web interface, use the Trap Receiver settings, available through the
Recipients option of the Events menu.
In the control console, use the SNMP option of the Network menu.
Item Definition
Community Name The password (15 characters or less) used when traps are sent
to the NMS identified by the Receiver NMS IP/Domain Name
setting.
Receiver NMS IP/
Domain Name
The IP address or domain name of the NMS to which traps are
sent. If this setting is 0.0.0.0 (the default), no traps are sent to
any NMS.
Generation (Web
interface)
Trap Generation
(control console)
Enables (by default) or disables the sending of any traps to the
NMS identified by the Receiver NMS IP/Domain Name
setting.
Authentication Traps Enables or disables the sending of authentication traps to the
NMS identified by the Receiver NMS IP/Domain Name
setting.