Filter
Top Products
8
Before Use
8. Click Finish to complete the installation of the
software.
Checking for the Latest
Version of the Program
Click in PE-DESIGN PLUS, then Check for
Updates.
The software is checked to determine whether or
not it is the latest version.
If the message shown below appears, the latest
version of the software is being used.
If the message shown below appears, the latest
version of the software is not being used. Click Yes,
and then download the latest version of the software
from the Web site.
a Note:
This procedure also automatically installs
the card writer driver. The card writer may
now be connected to your computer.
Make sure that PE-DESIGN PLUS starts
up correctly.
b Memo:
If the dialog box calling for restarting the
computer appears, it is necessary to restart
the computer.
a Note:
• This feature cannot be used if the
computer is not connected to the
Internet.
• It may not be possible to check for the
latest version if a firewall is turned on.
Turn off the firewall, and then try
performing the operation again.
• Administrator privileges are required.
b Memo:
If the
Always check for most recent version
at startup
check box is selected, the software
is checked at startup to determine whether or
not it is the latest version.
PE-DESIGN_Plus.fm Page 8 Wednesday, July 6, 2011 3:35 PM