Filter
Top Products
72
PES-Writer
Writing Multiple Embroidery Files to an
Original Card
Starting up PES-Writer
Click , then All Programs, then PE-DESIGN
PLUS, and then click PES-Writer.
Write to card
You can save multiple .pes or .pen files to an original
card at the same time.
1. Insert an original card into the USB Card
Writer Module.
c
“Transferring to a machine by using an
original card” on page 52
2. From the Hoop size selector (1), select the
appropriate size of embroidery hoop.
3. Click 1, and then select the folder where the
desired pattern files (.pes or .pen) are saved,
and then click OK.
The available pattern list displays the
image of the embroidery pattern files.
b Memo:
About .pen files
• .pen files, like .pes files, can be written to
original cards.
• .pen files are copyright-protected
embroidery data and can only be used
with the compatible embroidery machine.
• Some features may not be available, for
example, the embroidery cannot be
previewed.
• These files can be purchased through the
embroidery data sales site "iBroidery.com
Download Center". (US only)
a Note:
• The original card is inserted correctly
when you hear it snap into place.
• It is not necessary to turn off the
computer when original cards are
inserted or removed from the USB Card
Writer Module.
b Memo:
• Do not select a hoop size larger than the
embroidery hoop that can be used with
your embroidery machine. Otherwise, the
created original card will not work
correctly with the embroidery machine.
• Make sure to select a hoop size that is the
same or larger than the largest hoop size
of the files you want to write to the card,
otherwise the pattern cannot be written to
a card and “ ” appears.
1
1
XE8656-001.book Page 72 Thursday, June 30, 2011 2:56 PM