Filter
Top Products
53
Arranging Embroidery Designs
Arranging Embroidery Designs
Transferring to a machine
by using USB media
Designs can be transferred to
an embroidery machine
compatible with the USB Host
function.
1. Plug the USB media into the computer.
2. Click , then ,
then , then .
Data transfer begins.
3. After the data has been transferred, the
message “Finished outputting data.” appears,
indicating that the transfer is finished. Click
OK, and then remove the USB media.
Transferring directly to a
machine’s memory
Designs can be transferred to
embroidery machines that can
be connected to a computer
using a USB cable.
1. Connect the embroidery machine to the
computer.
2. Click , then ,
then , then .
Data transfer begins.
3.
After the data has been transferred, the
message “Finished outputting data.” appears,
indicating that the transfer is finished. Click
OK
.
a Note:
If there is already a file with the same name
at the destination, the following dialog box
appears. Select whether to overwrite the
existing file, to stop copying or to copy the
file using a different name.
b Memo:
If multiple USB media are connected, specify
where the data is to be transferred in the area
shown below.
b Memo:
• For details on transferring designs with this
method, refer to the Operation Manual
provided with your embroidery machine.
• If multiple machines are connected, specify
where the data is to be transferred in the
area shown below.
XE8656-001.book Page 53 Thursday, June 30, 2011 2:56 PM